Ideeën Anycubic Settings Uitstekend

Ideeën Anycubic Settings Uitstekend. Then, select anycubic > anycubic i3 mega. I am printing using anycubic's grey resin.

Beste The Complete And Utter Idiots Guide To 3d Printing In Resin For Wargamers Wargaming3d

There are some pretty broad ranges here, and i'd love to share my results so we can increase the sample size here. Normal exposure time (s) : Finally, change the printer name from anycubic i3 mega to anycubic mega x and click add.

Finally, change the printer name from anycubic i3 mega to anycubic mega x and click add.

Here's what i have now: Finally, change the printer name from anycubic i3 mega to anycubic mega x and click add. Here's what i have now: How can we add to it? I bought a photon and this thing is great. I am a complete newbie to all this, but not to printing from an ssd card or usb from cura. Normal exposure time (s) :

Then, select anycubic > anycubic i3 mega... There are some pretty broad ranges here, and i'd love to share my results so we can increase the sample size here. Here is what we suggest as the best cura anycubic i3 mega cura profile. 20.02.2019 · when i installed and booted octopi on my rpi3b+ it wanted to know which printer i used. Normal exposure time (s) : I am a complete newbie to all this, but not to printing from an ssd card or usb from cura. We could make two improvements to the sheet: How can we add to it?

The bedsize octopi thinks i have is smaller than my 210x210x205. I am printing using anycubic's grey resin. Here's what i have now: We'll use this as the base for the anycubic mega x since it's similar and then modify the profile from there. Here is what we suggest as the best cura anycubic i3 mega cura profile. We could make two improvements to the sheet: At the stock settings i'm already impressed with this printer, but i'd like to hear from the community with what settings you use.. 20.02.2019 · when i installed and booted octopi on my rpi3b+ it wanted to know which printer i used.

I am a complete newbie to all this, but not to printing from an ssd card or usb from cura. At the stock settings i'm already impressed with this printer, but i'd like to hear from the community with what settings you use. We could make two improvements to the sheet: So if you have any suggestions of where i should look or what i should do. Then, select anycubic > anycubic i3 mega. Normal exposure time (s) : 24.04.2021 · looking for optimal anycubic i3 mega cura settings? Here's what i have now: How can we add to it?. We'll use this as the base for the anycubic mega x since it's similar and then modify the profile from there.

It sees/connects to my printer, but i know i must have set something wrong. 24.04.2021 · looking for optimal anycubic i3 mega cura settings? I bought a photon and this thing is great. There are some pretty broad ranges here, and i'd love to share my results so we can increase the sample size here. Finally, change the printer name from anycubic i3 mega to anycubic mega x and click add. We could make two improvements to the sheet: 20.02.2019 · when i installed and booted octopi on my rpi3b+ it wanted to know which printer i used. At the stock settings i'm already impressed with this printer, but i'd like to hear from the community with what settings you use. Normal exposure time (s) : I am printing using anycubic's grey resin.. How can we add to it?

Here's what i have now: We could make two improvements to the sheet: Finally, change the printer name from anycubic i3 mega to anycubic mega x and click add... There are some pretty broad ranges here, and i'd love to share my results so we can increase the sample size here.

I bought a photon and this thing is great. I bought a photon and this thing is great. So if you have any suggestions of where i should look or what i should do. How can we add to it? There are some pretty broad ranges here, and i'd love to share my results so we can increase the sample size here. Normal exposure time (s) :.. We could make two improvements to the sheet:

We could make two improvements to the sheet: Here is what we suggest as the best cura anycubic i3 mega cura profile. Then, select anycubic > anycubic i3 mega. 20.02.2019 · when i installed and booted octopi on my rpi3b+ it wanted to know which printer i used. Finally, change the printer name from anycubic i3 mega to anycubic mega x and click add. It sees/connects to my printer, but i know i must have set something wrong. There are some pretty broad ranges here, and i'd love to share my results so we can increase the sample size here. So if you have any suggestions of where i should look or what i should do. 24.04.2021 · looking for optimal anycubic i3 mega cura settings? I am printing using anycubic's grey resin. I am a complete newbie to all this, but not to printing from an ssd card or usb from cura.. The bedsize octopi thinks i have is smaller than my 210x210x205.

20.02.2019 · when i installed and booted octopi on my rpi3b+ it wanted to know which printer i used... The bedsize octopi thinks i have is smaller than my 210x210x205. It sees/connects to my printer, but i know i must have set something wrong. Then, select anycubic > anycubic i3 mega. 20.02.2019 · when i installed and booted octopi on my rpi3b+ it wanted to know which printer i used. There are some pretty broad ranges here, and i'd love to share my results so we can increase the sample size here. We could make two improvements to the sheet: 24.04.2021 · looking for optimal anycubic i3 mega cura settings? So if you have any suggestions of where i should look or what i should do.. We'll use this as the base for the anycubic mega x since it's similar and then modify the profile from there.

I bought a photon and this thing is great. Then, select anycubic > anycubic i3 mega. It sees/connects to my printer, but i know i must have set something wrong. Here's what i have now:

It sees/connects to my printer, but i know i must have set something wrong.. Here is what we suggest as the best cura anycubic i3 mega cura profile.. 20.02.2019 · when i installed and booted octopi on my rpi3b+ it wanted to know which printer i used.

There are some pretty broad ranges here, and i'd love to share my results so we can increase the sample size here. Finally, change the printer name from anycubic i3 mega to anycubic mega x and click add. There are some pretty broad ranges here, and i'd love to share my results so we can increase the sample size here. Normal exposure time (s) : At the stock settings i'm already impressed with this printer, but i'd like to hear from the community with what settings you use. The bedsize octopi thinks i have is smaller than my 210x210x205. Here is what we suggest as the best cura anycubic i3 mega cura profile. We could make two improvements to the sheet: So if you have any suggestions of where i should look or what i should do... Here is what we suggest as the best cura anycubic i3 mega cura profile.

We could make two improvements to the sheet:. I am a complete newbie to all this, but not to printing from an ssd card or usb from cura. Finally, change the printer name from anycubic i3 mega to anycubic mega x and click add. I bought a photon and this thing is great. How can we add to it? There are some pretty broad ranges here, and i'd love to share my results so we can increase the sample size here. At the stock settings i'm already impressed with this printer, but i'd like to hear from the community with what settings you use. 24.04.2021 · looking for optimal anycubic i3 mega cura settings? So if you have any suggestions of where i should look or what i should do. We'll use this as the base for the anycubic mega x since it's similar and then modify the profile from there. I am printing using anycubic's grey resin. 24.04.2021 · looking for optimal anycubic i3 mega cura settings?

At the stock settings i'm already impressed with this printer, but i'd like to hear from the community with what settings you use... Finally, change the printer name from anycubic i3 mega to anycubic mega x and click add. I bought a photon and this thing is great. We could make two improvements to the sheet: How can we add to it? Then, select anycubic > anycubic i3 mega. There are some pretty broad ranges here, and i'd love to share my results so we can increase the sample size here. Then, select anycubic > anycubic i3 mega.

Then, select anycubic > anycubic i3 mega. So if you have any suggestions of where i should look or what i should do.

There are some pretty broad ranges here, and i'd love to share my results so we can increase the sample size here. Normal exposure time (s) :

24.04.2021 · looking for optimal anycubic i3 mega cura settings? 24.04.2021 · looking for optimal anycubic i3 mega cura settings? How can we add to it?

Normal exposure time (s) : We could make two improvements to the sheet:.. We could make two improvements to the sheet:

Normal exposure time (s) :.. We'll use this as the base for the anycubic mega x since it's similar and then modify the profile from there. I bought a photon and this thing is great. At the stock settings i'm already impressed with this printer, but i'd like to hear from the community with what settings you use. It sees/connects to my printer, but i know i must have set something wrong. The bedsize octopi thinks i have is smaller than my 210x210x205. Here's what i have now: There are some pretty broad ranges here, and i'd love to share my results so we can increase the sample size here. 24.04.2021 · looking for optimal anycubic i3 mega cura settings? Then, select anycubic > anycubic i3 mega. Normal exposure time (s) :.. Normal exposure time (s) :

We'll use this as the base for the anycubic mega x since it's similar and then modify the profile from there. The bedsize octopi thinks i have is smaller than my 210x210x205. So if you have any suggestions of where i should look or what i should do... Here is what we suggest as the best cura anycubic i3 mega cura profile.

At the stock settings i'm already impressed with this printer, but i'd like to hear from the community with what settings you use.. Here's what i have now: 20.02.2019 · when i installed and booted octopi on my rpi3b+ it wanted to know which printer i used. We'll use this as the base for the anycubic mega x since it's similar and then modify the profile from there. 24.04.2021 · looking for optimal anycubic i3 mega cura settings? At the stock settings i'm already impressed with this printer, but i'd like to hear from the community with what settings you use. The bedsize octopi thinks i have is smaller than my 210x210x205.. 24.04.2021 · looking for optimal anycubic i3 mega cura settings?

24.04.2021 · looking for optimal anycubic i3 mega cura settings?.. I bought a photon and this thing is great. There are some pretty broad ranges here, and i'd love to share my results so we can increase the sample size here. It sees/connects to my printer, but i know i must have set something wrong. I am a complete newbie to all this, but not to printing from an ssd card or usb from cura. At the stock settings i'm already impressed with this printer, but i'd like to hear from the community with what settings you use. Here's what i have now: We could make two improvements to the sheet:. We'll use this as the base for the anycubic mega x since it's similar and then modify the profile from there.

There are some pretty broad ranges here, and i'd love to share my results so we can increase the sample size here. Finally, change the printer name from anycubic i3 mega to anycubic mega x and click add. How can we add to it?. There are some pretty broad ranges here, and i'd love to share my results so we can increase the sample size here.

Here is what we suggest as the best cura anycubic i3 mega cura profile. Here's what i have now: How can we add to it? Here is what we suggest as the best cura anycubic i3 mega cura profile. 24.04.2021 · looking for optimal anycubic i3 mega cura settings? We'll use this as the base for the anycubic mega x since it's similar and then modify the profile from there. Finally, change the printer name from anycubic i3 mega to anycubic mega x and click add. So if you have any suggestions of where i should look or what i should do. I bought a photon and this thing is great... I am printing using anycubic's grey resin.

Then, select anycubic > anycubic i3 mega... How can we add to it? I am printing using anycubic's grey resin. Finally, change the printer name from anycubic i3 mega to anycubic mega x and click add. I am a complete newbie to all this, but not to printing from an ssd card or usb from cura. So if you have any suggestions of where i should look or what i should do. There are some pretty broad ranges here, and i'd love to share my results so we can increase the sample size here. Normal exposure time (s) : The bedsize octopi thinks i have is smaller than my 210x210x205. We could make two improvements to the sheet:.. At the stock settings i'm already impressed with this printer, but i'd like to hear from the community with what settings you use.

At the stock settings i'm already impressed with this printer, but i'd like to hear from the community with what settings you use. Here is what we suggest as the best cura anycubic i3 mega cura profile. We could make two improvements to the sheet: We'll use this as the base for the anycubic mega x since it's similar and then modify the profile from there. How can we add to it?. Here is what we suggest as the best cura anycubic i3 mega cura profile.

Here is what we suggest as the best cura anycubic i3 mega cura profile. Finally, change the printer name from anycubic i3 mega to anycubic mega x and click add. So if you have any suggestions of where i should look or what i should do. 24.04.2021 · looking for optimal anycubic i3 mega cura settings? I am a complete newbie to all this, but not to printing from an ssd card or usb from cura.. It sees/connects to my printer, but i know i must have set something wrong.

Then, select anycubic > anycubic i3 mega. We could make two improvements to the sheet: Here's what i have now: The bedsize octopi thinks i have is smaller than my 210x210x205. I am printing using anycubic's grey resin. Then, select anycubic > anycubic i3 mega. How can we add to it? Then, select anycubic > anycubic i3 mega.

Finally, change the printer name from anycubic i3 mega to anycubic mega x and click add... Finally, change the printer name from anycubic i3 mega to anycubic mega x and click add. 20.02.2019 · when i installed and booted octopi on my rpi3b+ it wanted to know which printer i used. We could make two improvements to the sheet: So if you have any suggestions of where i should look or what i should do. It sees/connects to my printer, but i know i must have set something wrong. How can we add to it?

At the stock settings i'm already impressed with this printer, but i'd like to hear from the community with what settings you use. How can we add to it? Normal exposure time (s) : Here's what i have now: Then, select anycubic > anycubic i3 mega. The bedsize octopi thinks i have is smaller than my 210x210x205. 20.02.2019 · when i installed and booted octopi on my rpi3b+ it wanted to know which printer i used. 24.04.2021 · looking for optimal anycubic i3 mega cura settings? I am printing using anycubic's grey resin. It sees/connects to my printer, but i know i must have set something wrong. Here is what we suggest as the best cura anycubic i3 mega cura profile.. I am a complete newbie to all this, but not to printing from an ssd card or usb from cura.

24.04.2021 · looking for optimal anycubic i3 mega cura settings? .. Then, select anycubic > anycubic i3 mega.

I am printing using anycubic's grey resin. I am a complete newbie to all this, but not to printing from an ssd card or usb from cura. 20.02.2019 · when i installed and booted octopi on my rpi3b+ it wanted to know which printer i used. I bought a photon and this thing is great. So if you have any suggestions of where i should look or what i should do. How can we add to it? It sees/connects to my printer, but i know i must have set something wrong. We could make two improvements to the sheet: Finally, change the printer name from anycubic i3 mega to anycubic mega x and click add. There are some pretty broad ranges here, and i'd love to share my results so we can increase the sample size here. The bedsize octopi thinks i have is smaller than my 210x210x205... How can we add to it?

There are some pretty broad ranges here, and i'd love to share my results so we can increase the sample size here. I bought a photon and this thing is great. We could make two improvements to the sheet: 20.02.2019 · when i installed and booted octopi on my rpi3b+ it wanted to know which printer i used. Then, select anycubic > anycubic i3 mega. Here's what i have now: At the stock settings i'm already impressed with this printer, but i'd like to hear from the community with what settings you use. It sees/connects to my printer, but i know i must have set something wrong. I am a complete newbie to all this, but not to printing from an ssd card or usb from cura. Here's what i have now:

Finally, change the printer name from anycubic i3 mega to anycubic mega x and click add... Then, select anycubic > anycubic i3 mega. We'll use this as the base for the anycubic mega x since it's similar and then modify the profile from there. 20.02.2019 · when i installed and booted octopi on my rpi3b+ it wanted to know which printer i used. The bedsize octopi thinks i have is smaller than my 210x210x205. Finally, change the printer name from anycubic i3 mega to anycubic mega x and click add. Here is what we suggest as the best cura anycubic i3 mega cura profile. How can we add to it?. We could make two improvements to the sheet:

We'll use this as the base for the anycubic mega x since it's similar and then modify the profile from there. The bedsize octopi thinks i have is smaller than my 210x210x205. Then, select anycubic > anycubic i3 mega... Normal exposure time (s) :

Finally, change the printer name from anycubic i3 mega to anycubic mega x and click add. Here's what i have now: I bought a photon and this thing is great. 24.04.2021 · looking for optimal anycubic i3 mega cura settings? Here is what we suggest as the best cura anycubic i3 mega cura profile. We could make two improvements to the sheet:.. The bedsize octopi thinks i have is smaller than my 210x210x205.

We'll use this as the base for the anycubic mega x since it's similar and then modify the profile from there. Here's what i have now: I am printing using anycubic's grey resin. Here is what we suggest as the best cura anycubic i3 mega cura profile. I bought a photon and this thing is great. The bedsize octopi thinks i have is smaller than my 210x210x205. We could make two improvements to the sheet: Finally, change the printer name from anycubic i3 mega to anycubic mega x and click add. 20.02.2019 · when i installed and booted octopi on my rpi3b+ it wanted to know which printer i used.. I bought a photon and this thing is great.

Normal exposure time (s) : There are some pretty broad ranges here, and i'd love to share my results so we can increase the sample size here. 20.02.2019 · when i installed and booted octopi on my rpi3b+ it wanted to know which printer i used. I am printing using anycubic's grey resin. I am a complete newbie to all this, but not to printing from an ssd card or usb from cura. Here's what i have now: Finally, change the printer name from anycubic i3 mega to anycubic mega x and click add. So if you have any suggestions of where i should look or what i should do. How can we add to it?. I am a complete newbie to all this, but not to printing from an ssd card or usb from cura.

We could make two improvements to the sheet: Finally, change the printer name from anycubic i3 mega to anycubic mega x and click add. There are some pretty broad ranges here, and i'd love to share my results so we can increase the sample size here.. I am a complete newbie to all this, but not to printing from an ssd card or usb from cura.

So if you have any suggestions of where i should look or what i should do. There are some pretty broad ranges here, and i'd love to share my results so we can increase the sample size here. 24.04.2021 · looking for optimal anycubic i3 mega cura settings? At the stock settings i'm already impressed with this printer, but i'd like to hear from the community with what settings you use.. Finally, change the printer name from anycubic i3 mega to anycubic mega x and click add.

I bought a photon and this thing is great. How can we add to it? Here's what i have now: The bedsize octopi thinks i have is smaller than my 210x210x205. So if you have any suggestions of where i should look or what i should do. Then, select anycubic > anycubic i3 mega. Normal exposure time (s) : 20.02.2019 · when i installed and booted octopi on my rpi3b+ it wanted to know which printer i used. I bought a photon and this thing is great. Here is what we suggest as the best cura anycubic i3 mega cura profile... There are some pretty broad ranges here, and i'd love to share my results so we can increase the sample size here.

Then, select anycubic > anycubic i3 mega.. It sees/connects to my printer, but i know i must have set something wrong. We could make two improvements to the sheet: Normal exposure time (s) : How can we add to it? I bought a photon and this thing is great.. It sees/connects to my printer, but i know i must have set something wrong.

The bedsize octopi thinks i have is smaller than my 210x210x205. The bedsize octopi thinks i have is smaller than my 210x210x205. It sees/connects to my printer, but i know i must have set something wrong. We could make two improvements to the sheet: 24.04.2021 · looking for optimal anycubic i3 mega cura settings? I bought a photon and this thing is great. Finally, change the printer name from anycubic i3 mega to anycubic mega x and click add.. There are some pretty broad ranges here, and i'd love to share my results so we can increase the sample size here.

I am printing using anycubic's grey resin. The bedsize octopi thinks i have is smaller than my 210x210x205. Here is what we suggest as the best cura anycubic i3 mega cura profile. Here's what i have now: I am printing using anycubic's grey resin. Finally, change the printer name from anycubic i3 mega to anycubic mega x and click add. Normal exposure time (s) : So if you have any suggestions of where i should look or what i should do... It sees/connects to my printer, but i know i must have set something wrong.

It sees/connects to my printer, but i know i must have set something wrong. How can we add to it? Here's what i have now:. It sees/connects to my printer, but i know i must have set something wrong.

Here is what we suggest as the best cura anycubic i3 mega cura profile... . We'll use this as the base for the anycubic mega x since it's similar and then modify the profile from there.

Then, select anycubic > anycubic i3 mega.. Here is what we suggest as the best cura anycubic i3 mega cura profile. We'll use this as the base for the anycubic mega x since it's similar and then modify the profile from there. Normal exposure time (s) : So if you have any suggestions of where i should look or what i should do. Then, select anycubic > anycubic i3 mega. We could make two improvements to the sheet:. So if you have any suggestions of where i should look or what i should do.

I bought a photon and this thing is great... At the stock settings i'm already impressed with this printer, but i'd like to hear from the community with what settings you use. How can we add to it? Here's what i have now: We could make two improvements to the sheet: I am printing using anycubic's grey resin. The bedsize octopi thinks i have is smaller than my 210x210x205. It sees/connects to my printer, but i know i must have set something wrong... Finally, change the printer name from anycubic i3 mega to anycubic mega x and click add.

At the stock settings i'm already impressed with this printer, but i'd like to hear from the community with what settings you use.. At the stock settings i'm already impressed with this printer, but i'd like to hear from the community with what settings you use. We could make two improvements to the sheet: Here's what i have now: It sees/connects to my printer, but i know i must have set something wrong. We'll use this as the base for the anycubic mega x since it's similar and then modify the profile from there. Normal exposure time (s) : I bought a photon and this thing is great. Then, select anycubic > anycubic i3 mega. The bedsize octopi thinks i have is smaller than my 210x210x205. I am a complete newbie to all this, but not to printing from an ssd card or usb from cura... How can we add to it?

We'll use this as the base for the anycubic mega x since it's similar and then modify the profile from there. .. Here's what i have now:

Here's what i have now:.. We could make two improvements to the sheet: How can we add to it? I am printing using anycubic's grey resin. It sees/connects to my printer, but i know i must have set something wrong. So if you have any suggestions of where i should look or what i should do. The bedsize octopi thinks i have is smaller than my 210x210x205. We'll use this as the base for the anycubic mega x since it's similar and then modify the profile from there.. Here's what i have now:

I am a complete newbie to all this, but not to printing from an ssd card or usb from cura... Normal exposure time (s) : I bought a photon and this thing is great. 24.04.2021 · looking for optimal anycubic i3 mega cura settings? Finally, change the printer name from anycubic i3 mega to anycubic mega x and click add. How can we add to it? 20.02.2019 · when i installed and booted octopi on my rpi3b+ it wanted to know which printer i used. We'll use this as the base for the anycubic mega x since it's similar and then modify the profile from there. So if you have any suggestions of where i should look or what i should do. I am a complete newbie to all this, but not to printing from an ssd card or usb from cura. The bedsize octopi thinks i have is smaller than my 210x210x205.. So if you have any suggestions of where i should look or what i should do.

So if you have any suggestions of where i should look or what i should do... Here's what i have now: The bedsize octopi thinks i have is smaller than my 210x210x205. Then, select anycubic > anycubic i3 mega.. I am printing using anycubic's grey resin.

20.02.2019 · when i installed and booted octopi on my rpi3b+ it wanted to know which printer i used. Here is what we suggest as the best cura anycubic i3 mega cura profile. So if you have any suggestions of where i should look or what i should do. At the stock settings i'm already impressed with this printer, but i'd like to hear from the community with what settings you use. 24.04.2021 · looking for optimal anycubic i3 mega cura settings? Finally, change the printer name from anycubic i3 mega to anycubic mega x and click add. We could make two improvements to the sheet:

The bedsize octopi thinks i have is smaller than my 210x210x205. Then, select anycubic > anycubic i3 mega. At the stock settings i'm already impressed with this printer, but i'd like to hear from the community with what settings you use. I am printing using anycubic's grey resin. I am a complete newbie to all this, but not to printing from an ssd card or usb from cura. 24.04.2021 · looking for optimal anycubic i3 mega cura settings? I bought a photon and this thing is great. Finally, change the printer name from anycubic i3 mega to anycubic mega x and click add. Here is what we suggest as the best cura anycubic i3 mega cura profile.

It sees/connects to my printer, but i know i must have set something wrong... I am a complete newbie to all this, but not to printing from an ssd card or usb from cura.

The bedsize octopi thinks i have is smaller than my 210x210x205... So if you have any suggestions of where i should look or what i should do. Here's what i have now:. 20.02.2019 · when i installed and booted octopi on my rpi3b+ it wanted to know which printer i used.

The bedsize octopi thinks i have is smaller than my 210x210x205. How can we add to it? We'll use this as the base for the anycubic mega x since it's similar and then modify the profile from there. 24.04.2021 · looking for optimal anycubic i3 mega cura settings? I am printing using anycubic's grey resin. We could make two improvements to the sheet: I am a complete newbie to all this, but not to printing from an ssd card or usb from cura. Here's what i have now: Then, select anycubic > anycubic i3 mega. Here is what we suggest as the best cura anycubic i3 mega cura profile. Normal exposure time (s) : Then, select anycubic > anycubic i3 mega.

The bedsize octopi thinks i have is smaller than my 210x210x205. We could make two improvements to the sheet: There are some pretty broad ranges here, and i'd love to share my results so we can increase the sample size here. We'll use this as the base for the anycubic mega x since it's similar and then modify the profile from there. How can we add to it? I am a complete newbie to all this, but not to printing from an ssd card or usb from cura. Normal exposure time (s) : 24.04.2021 · looking for optimal anycubic i3 mega cura settings? Here's what i have now: Here is what we suggest as the best cura anycubic i3 mega cura profile... It sees/connects to my printer, but i know i must have set something wrong.

The bedsize octopi thinks i have is smaller than my 210x210x205. I am a complete newbie to all this, but not to printing from an ssd card or usb from cura.. I am printing using anycubic's grey resin.

We could make two improvements to the sheet: I am a complete newbie to all this, but not to printing from an ssd card or usb from cura. Then, select anycubic > anycubic i3 mega. I bought a photon and this thing is great. At the stock settings i'm already impressed with this printer, but i'd like to hear from the community with what settings you use. Here's what i have now: 24.04.2021 · looking for optimal anycubic i3 mega cura settings? Here is what we suggest as the best cura anycubic i3 mega cura profile.

Here's what i have now: I am printing using anycubic's grey resin. Here is what we suggest as the best cura anycubic i3 mega cura profile. The bedsize octopi thinks i have is smaller than my 210x210x205. I am a complete newbie to all this, but not to printing from an ssd card or usb from cura. We'll use this as the base for the anycubic mega x since it's similar and then modify the profile from there. At the stock settings i'm already impressed with this printer, but i'd like to hear from the community with what settings you use. How can we add to it?.. 24.04.2021 · looking for optimal anycubic i3 mega cura settings?

There are some pretty broad ranges here, and i'd love to share my results so we can increase the sample size here. Normal exposure time (s) : It sees/connects to my printer, but i know i must have set something wrong. Then, select anycubic > anycubic i3 mega. I am a complete newbie to all this, but not to printing from an ssd card or usb from cura.

So if you have any suggestions of where i should look or what i should do. Normal exposure time (s) : I am printing using anycubic's grey resin. There are some pretty broad ranges here, and i'd love to share my results so we can increase the sample size here. Here's what i have now: We'll use this as the base for the anycubic mega x since it's similar and then modify the profile from there. Here is what we suggest as the best cura anycubic i3 mega cura profile. Finally, change the printer name from anycubic i3 mega to anycubic mega x and click add. 20.02.2019 · when i installed and booted octopi on my rpi3b+ it wanted to know which printer i used. I am a complete newbie to all this, but not to printing from an ssd card or usb from cura. We'll use this as the base for the anycubic mega x since it's similar and then modify the profile from there.